Will The Ring Solar Panel Work On The Lorex Security Camera

ACSOL2 Series Solar Console for Wire Gratuitous Cameras

Quick Get-go Guide

lorex.com

Packet contents

• Solar panel with 10ft (3m) power cable
• Wall mount
• Wall mountain template
• Wall mount screws & anchors (×4)
• Aligning ring screws (x2)
• 1/4″ (6mm) Drill bit for cement and wood
• Cable guides, screws & anchors (×3)
• Velcro cable necktie

User-supplied tools

• Drill
• Phillips screwdriver

Dimensions

Position the solar panel

• The solar console produces power only when exposed to sunlight. You will demand to choose a location with enough of direct sunlight.
• To reach the best charging performance, angle the solar console towards the sun. The optimal angle varies throughout the yr, depending on the seasons and your location. Equally a full general guideline, the solar panel should be facing the equator; in the northern hemisphere, the solar panel faces south and in the southern hemisphere, the solar panel faces north.
• Make sure the ruby LED indicator on the back of the solar panel turns on (come across Figure i). If the LED turns on, the solar panel is receiving plenty light to maintain the camera battery pack'due south accuse.

Tip: Periodically make clean the solar panel with a soft material and warm water to go along the surface clear.

Select your installation method

Option A (recommended):
Installing the solar panel separately

Install your wire-free photographic camera and solar panel carve up from each other, encounter pages 5-seven.

Choice B: Installing the solar console and camera together

Install your wire-gratuitous camera direct onto the solar panel.

Attention: For pick B, the photographic camera and solar panel should be installed facing the residence. If the photographic camera is installed backing onto the residence, the wall mountain may cake the wireless signal.

Option A – Installing the solar console separately

1. The solar panel is designed to maintain the camera battery pack's accuse. Make sure to first accuse the battery pack using the micro USB cable.

two. Stick the wall mount template in the desired mounting position.

3. Drill into the wall mount template'due south marked holes using the ane/4″ (6mm) drill bit. If attaching to masonry, gently tap four anchors into the holes.

4. Secure the wall mount using four screws (meet Figure 1).

Option A – Installing the solar panel separately

5. Loosen the wall mount's aligning ring by turning information technology counterclockwise (see Figure 2).

half dozen. Angle the rotating adjustment screw 45° abroad from the mounting surface (run into Figure 2).

7. Twist the solar panel onto the wall mountain. Be careful non to hit the mounting surface.

8. Adjust the angle of the solar console to receive directly sunlight, then tighten the aligning ring.

nine. Use a Phillips screwdriver and the adjustment ring screw to secure the aligning band from underneath the wall mount (come across Figure two).

10. Run the solar panel's power cable along the cablevision guide on the wall mount arm (encounter Figure 3).

11. Pull up the ability port comprehend on the dorsum of your camera.

12. Use the solar panel'south power cable to connect to the ability port (see Figure 3).

Optional cable direction:

• Use the adjustable Velcro cable tie to secure cords and organize any clutter.
• Secure the solar panel's 10ft (3m) power cable to the wall using the cable guides, screws, and anchors as needed (come across Figure 4).

Selection B – Installing the solar panel and photographic camera together

Attending: The camera can exist installed onto the solar console only if the camera is facing the residence. If the camera is installed bankroll onto the residence, the wall mountain may cake the wireless signal. We recommend installing the solar console and camera separately, run into pages 5-7.

1. The solar console is designed to maintain the camera battery pack's accuse. Make sure to first accuse the battery pack using the micro USB cable.

ii. Stick the wall mount template in the desired mounting position.

3. Drill into the wall mount template'southward marked holes using the one/4″ (6mm) drill bit. If attaching to masonry, gently tap four anchors into the holes.

4. Secure the wall mount using four screws (meet Effigy 1).

5. Loosen the wall mount's adjustment ring by turning it counterclockwise (see Effigy ii).

6. Bending the rotating adjustment screw 45° away from the mounting surface (come across Effigy ii).

7. Twist the solar panel onto the wall mountain. Exist careful not to hit the mounting surface.

8. Adapt the angle of the solar panel to receive straight sunlight, so tighten the adjustment ring.

9. Use a Phillips screwdriver and the adjustment ring screw to secure the aligning band from underneath the wall mount (run across Effigy 2).

Option B – Installing the solar panel and camera together

10. Use a Phillips screwdriver and two screws to attach the camera's mounting plate to the wall mount (see Figure 3).

11. Align the iv tabs from the photographic camera's bracket with the four slots on the mounting plate (see Figure 4).

12. Push button down to lock the camera.

13. Run the solar panel'due south power cable along the cablevision guide on the wall mount arm (see Figure 3).

fourteen. Pull up the power port cover on the back of the camera.

15. Use the solar panel's power cablevision to connect to the camera's ability port (see Figure 3).

Optional cable management: Use the adjustable Velcro cable necktie to secure cords and organize whatever clutter.

Need help?
Visit help.lorex.com for up-to-date information and resource: · Annals your product · Download product guides · Picket how-to-videos · Find related troubleshooting tips & FAQs
Delight see our full Terms of Service and Limited Hardware Warranty Policy at lorex.com/warranty

This device complies with office 15 of the FCC Rules. Operation is subject to the post-obit ii conditions: (1) This device may non cause harmful interference, and (ii) This device must accept any interference received, including interference that may crusade undesired operation. Copyright

© 2021 Lorex Corporation Equally our products are subject to continuous improvement, Lorex reserves the right to modify product blueprint, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.

Documents / Resource

Source: https://manuals.plus/lorex/acsol2-series-solar-panel-for-wire-free-cameras-manual

Posted by: spenceroune1970.blogspot.com

Share this post